Melitta E 970-101, Operating Instructions Manual

Page: 172 / 182

170
→ The prompt Remove water tank will appear on
the graphic display.
5 Lift the lid of the water tank (Fig. A, No. 6)
and pull the water tank up and out of the
appliance and then empty it completely.
6 If you are using a water filter, remove it from
the water tank.
7 Add the descaling agent (e.g. Melitta
®
ANTI
CALC Espresso Machines liquid descaling
agent) to the water tank according to the
instructions on the packaging.
Warning!
The descaling agent can cause skin irritations
Comply with the safety instructions and the dosing information
specified on the descaling agent packaging.
8 Reinsert the water tank.
9 Place a vessel with a capacity of about 0.7
l or the coffee grounds container under the
outlet and press the rotary switch to conti -
nue.
10 Connect the tube to the drip tray and to the
outlet (Fig. D) and press the rotary switch to
confirm.
→
The integrated descaling programme is
continued. This stage takes approximately
20 minutes. Water flows out of the outlet as
well as in the interior of the appliance and into
the drip tray through the tube. The prompt
Empty container and tray then appears on the
graphic display.
11 Remove the tube from the drip tray.
Remove
water tank
Descaling
Empty
container
and tray
Descaling