Melitta E 970-101, Operating Instructions Manual

Page: 170 / 182

168
5 Turn the rotary switch until Cleaning is high -
lighted and press it to confirm the selection.
6 Turn the rotary switch until Start is high -
lighted and press it to start the programme.
7 Empty the drip tray and the coffee grounds
container and then reinsert them.
8 Place a vessel with a capacity of about 0.7
l or the coffee grounds container under the
outlet and press the rotary switch to conti -
nue.
→ First, two rinsing processes will be carried out.
The prompt Insert cleaning tab into ground
coffee chute will then appear on the graphic
display.
9 Open the lid of the ground coffee chute,
throw in a cleaning tab (Fig. I) and close the
lid of the ground coffee chute.
→
The integrated cleaning programme is con -
tinued. This stage takes approximately 5
minutes. Water flows out of the outlet as well
as in the interior of the appliance into the drip
tray. The prompt Empty container and tray
then appears on the graphic display.
10 Empty the vessel under the outlet.
11 Empty the drip tray and the coffee grounds
container and then reinsert them and replace
the vessel under the outlet.
→ The integrated cleaning programme is con -
tinued. This stage takes approximately 5
minutes. Water flows out of the outlet as well
as in the interior of the appliance into the drip
tray. The prompt Empty container and tray
then appears on the graphic display.
Care
Cleaning
Intensive Cleaning
Descaling
Cleaning
Start
Exit
Insert cleaning
tab into ground
coffee chute
Cleaning
Empty
container
and tray
Cleaning
Empty
container
and tray
Cleaning