Melitta Cafina XT8, Operating Instructions Manual

Page: 30 / 40

8 Cleaning
Clean the coffee machine carefully in accordance with
the following specifications to maintain the value and
hygiene of the machine.
Note
The following website provides all specific
information on the machine and cleaning
agents:
www.planerhandbuch.de
8�1 Safety measures
DANGER
Risk of fatal electric shock!
Contact with live parts poses a danger of death.
•
Never open covers unless explicitly instructed to do
so.
•
Never remove bolts and the housing parts that they
hold in place.
•
Do not clean the machine or the installation area of
the machine with a water jet, high-pressure cleaner,
or steam cleaner.
•
Never pour water over the machine.
•
Only clean the machine with a damp cloth.
ATTENTION
Machine damage!
Water penetration can damage the machine and cause a
short circuit.
•
Do not clean the machine or the installation area of
the machine with a water jet, high-pressure cleaner,
or steam cleaner.
•
Never pour water over the machine.
•
Only clean the machine with a damp cloth.
8�2 Cleaning intervals
Interval Which parts? How to clean
After every use Steam wand Emit steam for
approx. 2 seconds.
Then clean with a
clean, damp cloth.
Daily
(1, 2)
Milk and brewing
system
Start cleaning
program.
Daily Instant system Clean.
Daily Coffee grounds
drawer
Clean.
Daily All systems/parts
that have been
used at least once
Clean with a clean,
damp cloth.
1x weekly Bottom of the
beverage outlet
Clean with a clean,
damp cloth; use
a damp brush if
necessary.
1x weekly Bottom of the milk
foam wand
Clean with a clean,
damp cloth.
Following an
extended standstill
Milk and brewing
system
Start cleaning
program.
As required (at
least once a
month)
Bean and instant
containers
Clean.
As required (at
least once a
month)
Housing parts
•
Surfaces,
plastic parts,
painted
surfaces
Clean externally
with a clean,
damp cloth.
(1)
Twice a day for heavier use (more than 20 l of milk or more
than 150 coffee products).
(2)
Once or twice a week an additional cleaning with AMC
cleaner is required.
8�3 Cleaning prompt and dispensing lock
If cleaning is required (e.g., one of the programmed
cleaning times has been exceeded), the cleaning prompt
appears on the display. Products can then only be
dispensed for a limited time or number of products.
If no cleaning work is carried out, product dispensing is
then locked. The products are no longer displayed and
cannot be dispensed.
To reset the cleaning prompt or dispensing lock, the
machine must be cleaned.
Cleaning
30
28514 • 20170301
8