![Melitta Cafina XT8 Operating Instructions Manual Download Page 21](http://html1.mh-extra.com/html/melitta/cafina-xt8/cafina-xt8_operating-instructions-manual_1768118021.webp)
4. Press the "
" button (1) to continue dispensing the
products.
͵
Once all products from the batch have been dis-
pensed, the machine returns to the start screen.
You can bring forward the dispensing of a product or
multiple selection of a product from the batch so that it
is the next in the sequence:
1. Press the required product or the multiple selection
of a product in the batch.
2. Press the "
" button (1) to continue dispensing the
products with the selection.
͵
Once all products from the batch have been dis-
pensed, the machine returns to the start screen.
9
The products have been dispensed and the batch
mode is finished.
Adding or removing products in batch mode
Products which are already in the batch can be added or
removed.
000300
Cappuccino
**
Espresso
***
Cappuccino
**
Pre-set batch input
2
1
Fig. 28: Product dispensing in batch mode
1. Press the required product or the multiple selection
of a product in the batch.
2. Press the "+" (add) or "–" (remove) button (1) to add
or remove the product once each time.
9
The product is added to or removed from the batch.
Products which are not already in the batch can be added.
1. Select one of the following options:
•
Once a product has been dispensed from the
batch, close and open the batch with the symbol
in the bar (2) (see Fig. 27).
•
While the product is being dispensed, press the
"Pre-set batch input" button (2).
2. Press the products to be dispensed in succession.
9
The products are added to the batch.
6�12
Preparing coffee from ground coffee
The manual coffee chute can be used to prepare coffee
from ground coffee without removing beans from the
bean container. This is normally used to prepare decaf-
feinated coffee. However, another type of ground coffee
can normally also be added via the chute.
000244
1
Fig. 29: Filling ground coffee
1. On the display, press the corresponding product
button for the product with manual coffee addition.
͵
The prompt for the manual coffee addition is
shown on the display.
2. Open the flap (1).
3. Add a loosely filled dosage spoon (approx. 8-9 g) of
ground coffee via the chute.
͵
Do not fill too much ground coffee into the chute.
Otherwise the machine cancels the operation
with an error message. The ground coffee will be
dispensed in the coffee grounds drawer.
4. Close the flap (1).
5. Confirm the filling process on the display.
9
The coffee addition is confirmed and the product is
dispensed.
Dispensing products
21
28514 • 20170301
6