6�8
Dispensing multiplicator products
Under product settings (see chapter 7.6 on page 26),
you can set up products as multiplicator products. With
this you can issue multiple portions of a product in suc-
cession if required, for example, to fill a larger cup.
Note
In order to dispense a multiplicator product,
there must be enough product material and
capacity in the coffee grounds drawer.
1. Position a cup underneath the beverage outlet.
2. Press the corresponding product button on the
display.
͵
While the product is being dispensed, the display
shows how many single products are included in
the multiplicator product and which single prod-
uct is currently being dispensed (e.g., “1 / 4”, the
first product of four single products).
͵
The products are prepared and dispensed in suc-
cession.
9
The dispensing of the multiplicator product is
complete.
6�9
Multiple dispensing of a single product
Multiple portions of a product can be requested as
necessary and dispensed directly in sequence. The
advantage of multiple dispensing is that you do not need
to select the product again for every subsequent portion.
1. Position a cup underneath the beverage outlet.
2. Press the corresponding product button on the
display.
3. While the product is being dispensed, press “+” (see
Fig. 23) multiple times in succession depending on
the number of additional portions that you would
like to dispense.
͵
The products are prepared and dispensed in suc-
cession.
4. Once a portion has been dispensed, put the cup aside
and place another cup underneath the beverage
outlet.
9
The multiple dispensing operation is complete.
6�10
Preparing coffee from ground coffee
The manual coffee chute can be used to prepare coffee
from ground coffee without taking beans from the bean
container. This is normally used to prepare decaffeinated
coffee. However, another type of ground coffee can
normally also be added via the chute.
000319
1
Fig. 24: Filling ground coffee
1. On the display, press the corresponding product
button for the product with manual coffee addition.
͵
The prompt for the manual coffee addition is
shown on the display.
2. Open the flap (1).
3. Add a loosely filled measuring spoon (approx. 8-9 g)
of ground coffee via the chute.
͵
Do not fill too much ground coffee into the chute.
Otherwise the machine cancels the operation
with an error message. The ground coffee will be
dispensed in the coffee grounds drawer.
4. Close the flap (1).
5. Confirm the filling process on the display.
9
The coffee addition is confirmed and the product is
dispensed.
Dispensing products
20
35878 • 20201001
6
