Melitta Avanza, Operating Instructions Manual

Page: 44 / 344

Changing basic settings
44
GB
5.7 Preparing hot water
You prepare hot water on the Cappucci-
natore.
CAUTION
Hot water and hot steam flowing out of
the pipe
ƒ
Do not reach into the hot water that is
flowing out.
ƒ
Do not touch the steam pipe during
and immediately after use. Wait until
the steam pipe has cooled down.
Requirement: The appliance is ready for
operation. The Cappuccinatore is con-
nected.
1. Place a vessel beneath the Cappucci-
natore.
2. Open the "valve".
» Beverage dispensing starts.
3. Close the "valve".
» Beverage dispensing stops.
4. Remove the vessel.
6 Changing basic settings
You can change the basic settings of the
appliance with several functions. The func-
tions are divided into two service modes.
6.1 Service mode 1
Each function is assigned a display.
Service mode 1
Display
function
Auto OFF
Water hardness
Switch-off rinsing
Filter programme
Cleaning programme
Service mode 1
Display
function
Descaling programme
Brewing temperature
To call up Service mode 1, proceed as
follows:
Requirement:
The appliance is ready for
operation.
1.
Press the "Service" button for
more than 2 seconds to call up Service
mode 1.
»
The Ready display flashes rap-
idly and the 2 cups button lights up.
2.
Press the "Service" button one or
more times to access the desired
function.
» A display lights up according to the
function selected, see Service mode 1
table.
» The number of lit bean symbols
indicates the current setting of the
function.
Press the "Coffee" direct key to exit the
service mode without saving the settings.
Information
If no further input is made within 1 min-
ute, the appliance returns to Ready mode.
6.2 Setting Auto OFF
If you do not operate the machine for a
long time, it initially switches to energy
save mode. After a further preset time, the
appliance switches off.
The following settings are possible:
Display Energy save
mode after:
Switch off after:
3 minutes 30 minutes
10 minutes 1 hour
20 minutes 4 hours