![background image](http://html1.mh-extra.com/html/melissa/671-140/671-140_user-manual_1767508024.webp)
24
USING THE APPLIANCE
The appliance is intended for use for
dehumidifying rooms in homes or
offices, where the appliance removes
humidity and creates a dry and
comfortable indoor climate through
cooling technology.
The appliance is equipped with four
wheels and a handle, which, together
with the compact, light-weight
design, makes it easy to move the
appliance from room to room. The
appliance is quiet and has low energy
consumption.
1. Connect the appliance to mains
electricity. The appliance will beep
and the indicator for connected
power (5) will light up green. This
indicator lamp will be lit regardless
of whether the dehumidifier
function is active or not.
2. Start the dehumidifier function by
pressing the on/off button (7) on
the control panel (1).
3. Press the button for adjusting the
fan speed (6) to switch between
the two fan speeds.
o The indicator lamp for high fan
speed (2) will light up red.
o The indicator lamp for slow fan
speed (3) will light up green.
o The appliance is, as standard,
set to run with low fan speed
when the dehumidifier function
is activated.
4. Switch off the dehumidifier
function by pressing the On/Off
button again.
o When you turn off the
dehumidifier function by
pressing the on/off button,
the appliance will remember
the most recent setting, and
this will be activated when you
next press the on/off button.
5. Turn off the appliance completely
by removing the plug from the wall
socket.
o When you remove the plug
from the wall socket, the
dehumidifier function will
return to the standard settings,
and the indicator lamp for
low fan speed will be lit up
in green the next time the
appliance is connected and
the dehumidifier function is
started.
6. When the water collection tank (11)
is full, the appliance will beep 15
times and the indicator lamp for
full water collection container (4)
will light up red. When emptying
the water collection tank, carefully
press in the sides of the container
and pull it out using both hands.
o Please make sure that the
water collection container
is correctly replaced after
emptying. If it is not replaced
correctly, the indicator
lamp will remain lit and the
dehumidifier function cannot
be started.
o When emptying the water
container, the floater (10)
must not be removed, as this
will disable the sensor that
records the water level.
o The appliance is equipped
with a connector for an
outlet hose (9). By using a
plastic hose with an internal
diameter of 10mm, the water
in the collection tank can be
continuously emptied during
dehumidifying.
Summary of Contents for 671-140
Page 33: ...33...