Please read this instruction manual carefully and
familiarise yourself with your new Waffle maker
before using for the first time.
Please retain this manual for future reference.
Before first use
Before you take your new Waffle maker in use, the
heating plates must be wiped over with a light
damp cloth. Hereafter you should grease the
heating plates with butter or frying oil.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety
precautions should always be followed to reduce
risk of fire, electric shock and/or personal injury,
including the following:
-
Make sure that the supply voltage in your
home is the same as the voltage marked on
the appliance.
-
Only use the appliance on a stable work
surface, away from water.
-
Unplug the appliance from the mains supply
when not in use, in case of malfunction and
before and during cleaning the appliance.
-
Never place the appliance or parts of it near
a heat source.
-
Do not hold your hands near the hole in the
lid during operation.
-
Never immerse the appliance, parts of it or
the plug in water.
-
Children should never be allowed to operate
the appliance.
-
Do not allow the cord to hang down over the
edge of the work surface as it could
accidentally be pulled.
-
Never disconnect the plug by pulling on the
supply cord.
-
Should the appliance fail to operate or in
case of any damage contact the importer for
repair. Improper repairs can result in
considerable hazards for the user.
-
Never use the appliance if the cord has been
damaged or if the appliance has been
dropped and is visibly damaged, or functions
abnormally.
-
The waffle maker is intended for domestic
use only and is not designed for commercial
use. The manufacturer accepts no liability if
the appliance is used for commercial
purposes or in manner, which does not
comply with the operating.
Normal Use
1.
Place the waffle maker at a plain horizontal
work surface.
2.
Connect to 220-240 V via the plug to the
outlet. The lamp will light up. There may
during the first heating, occur some smoke,
which is normal.
3.
Close lid and wait until the lamp turns off.
Now the wafflemaker has the right
temperature.
4.
Open the waffle maker, poor down the dough
in the middle of the lower heating plate, it will
spread out when you close the lid.
5.
Close the lid. The lamp will go on and off
during use, which is indicating that the
thermostat is making sure that the plates has
the right temperature.
6.
The lid will go up a little during baking, since
the dough will raise. Do not open the waffle
maker during the first minute of baking.
7.
Now gently open the waffle maker, carefully
loosen the waffle with a plastic palette or a
wooden palette. NEVER use any metal on
the baking plates, because this will damage
the surface. In case there is used any metal
on the baking plate, the warranty will not be
valid.
8.
When you are done baking, leave the waffle
maker open, remove the plug from the outlet.
Let the Waffle maker cool completely down
before you clean the plates with a damp
cloth. Do never use any water or detergent.
14
UK
643008_IM 18/05/06 14:09 Side 14
