Melissa 637-005, Manual

Page: 28 / 46

28 29
How to reassemble the appliance
• Place the rear part on the screen, so that the screw
holes along the side of the rear part align with the
holes on the screen. The two parts click together.
• Assemble the front base (with the on/off button) and
make sure the cords are not caught between the
parts.
• Attach the rear base and make sure the stand is
correctly aligned with the screw holes at the back of
the appliance.
• Screw the two parts of the base together and fasten
the stand with the two screws at the top.
• Place the rest of the screws in the screw holes along
the side of the appliance and fasten them.
• Assemble the top cover.
CLEANING
When cleaning the appliance, you should pay attention
to the following points:
• Remove plug from the mains socket, and allow the
appliance to cool down before cleaning it.
• Never submerge the apparatus in water, and no
water must be allowed to get into it.
External cleaning
• Clean the appliance by wiping it with a damp cloth.
A little detergent can be added if the appliance is
heavily soiled.
• Never use a scouring pad, steel wool or any form of
strong solvents or abrasive cleaning agents to clean
the appliance, as those may damage the outside
surfaces of the appliance.
• IMPORTANT! Allow to dry fully after cleaning before
using again. Do not use appliance if damp.
Internal cleaning
• Remove the screen as described above, wipe off
reflector, inside of screen and tubes with a dry, soft
cloth. Do not use any kind of cleaning agents.
SPECIFICATIONS
Model WL1 WL3
Voltage 220~240 V 220~240 V
Wattage 180 VA 72 W
Hz 50 50
LUX 10,000 at 10 cm 10,000 at 10 cm
Lamp type FSL-YDW36-HRR Philips-PL-
L36W/865/4P
Fuse 250 V; 2 A VDE 250 V; 2 A VDE
Operating conditions:
Temperature: +5 °C to 45 °C
Relative Humidity: 30 % to 90 %
Storage conditions:
Temperature: +5 °C to 50 °C
Relative Humidity: 30 % to 90 % (no condensation)
Class I appliance; IP20
EXPLANATION OF SYMBOLS ON THE EQUIPMENT
Consult instructions for use
Caution
IP20
Protected against solid foreign
objects of 12.5 mm Ø and
greater, not protected against
of water
If you want to dispose this
product, do not mix with general
household waster. There is a
separate collection system for
used electronics products in
accordance with legislation
under WEEE Directive (Directive
2002/96/EC) and is effective
only with in European Union.
Manufacturer
Date of manufacture
Serial number
This CE symbol certifies that
the product complies with the
essential requirements of the
Medical Device Directive.
“ON” / “OFF”
EMC Information-Guidance and Manufacture’s
Declaration
Technical Description Concerning Electromagnetic
Emission