Melissa 631-038, User Manual

Page: 10 / 18

Please note: When batteries are being inserted/replaced, the scale will in some cases
display a figure – e.g. 2.1 kg. This figure will flash in the display for a short time, after
which the display will read "Err" and switch off. This is not an error, but simply the scale
recalibrating itself. The scale will then be ready for use.
INTRODUCTION
Please read this instruction manual carefully and familiarise yourself with your new scale
before using it the first time. Please retain this manual for future reference.
SAFETY INSTRUCTIONS
Read all instructions before using.
Use this appliance only for its intended use as described in this manual.
In order to prevent interference; do not use the device near equipment with strong electrical
field. Keep the device at a sufficient distance from such equipment or turn them off when
using.
The scale is slippery when wet.
SAVE THESE INSTRUCTIONS
INSERTING BATTERIES
Open the battery compartment on the back of the device.
Insert the Batteries in the battery holder.
BEFORE STARTING TO USE
To calibrate the scale press central of the platform once (about 1 sec) and release to activate
the calibration. When "0.0" disappear from the display the scale is ready for use
Please ajust the weighing mode switch located on the bottom of the scale to set your
weighing unit.
You must choose between: kg./ Lb./St.
START TO USE
Activate the scale by tapping it or giving it a push. the scale will automatically turn on and
start weighing. As soon as the display shows 0,0 the scale is ready for use.
Keep still as possibly, after about 3 sec. your weight will be displayed in your selected
mode.
The scale automatically turns off. 10 secs. after the user has stepped off the scale.
SIMPLE WEIGHING FUNCTION
Activate the scale as mentioned earlier. Place your feet on the scale without leaning to a
side. The display will be locked when you stably stand on the scale.
The display will show the weight when the measurement has been locked. The weight will
be shown for 6 seconds. You must step down from the scale and restart when used
repentantly.
If the scale is activated but not loaded the digits will disappear after 8 seconds.
MAINTENANCE:
Do not overload the scale max. 150 kg./100 g. interval. Do not shock the scale with sudden
loading or striking.
Keep the scale in a warm and dry place.
REPLACEMENT OF BATTERY
It will display "LO" when the power is low. Please open the battery compartment and
replace the batteries as described above.
10
UK
HCB-FB IM_rev 15/12/04 8:37 Side 10