40
UK
MAIN COMPONENTS
1. Light screen
2. On/Off button
3. Hole for stand
4. Stand
5. Power connector port
6. Storage space for stand
7. Adapter (not shown)
USE
• Remove the stand (4) from the
storage space (6) and insert it into
one of the holes (3) on the rear of the
appliance.
• Place the appliance on a table or
similar.
• Insert the connector from the adapter
into the power connector port (5) and
plug the adapter into a power outlet.
• Switch on the appliance using the
on/off button (2).
Sit down in front of the appliance in a
position where you can comfortably
see the light and with your face 20 cm
from the screen. You do not need to
sit directly in front of the screen.
• The duration of the light treatment
depends on your distance from the
screen:
Distance
Duration
20 cm
2 hours
• The light treatment can be interrupted
and you can do other things at
the same time (e.g. read or watch
television) as long as you sit within 20
cm from the appliance.
• Do not look directly into the light
constantly, but look at it regularly.
• Always turn off the appliance using
the on/off button, and unplug the
adapter, when it is not in use.
CLEANING
When cleaning the appliance, you should
pay attention to the following:
• Remove the adapter from the mains
socket, and allow the appliance to
cool down completely before cleaning
it.
• Do not submerge the appliance in
water, and do not let water enter the
appliance.
• Clean the apparatus by wiping it with
a damp cloth. A little washing-up
liquid can be added if the appliance is
heavily soiled.
• Do not use scouring pads, steel wool
or any form of strong solvents or
abrasive cleaning agents to clean the
appliance, as they can damage the
external surfaces of the appliance.
Allow to dry completely after cleaning.
Do not use the appliance if it is damp.
