15
UK
• Place the appliance on a heat-re-
sistant surface during charging. The
appliance must not be charged while
it is on a bed or in any other location
where the heat from the charging
cannot dissipate.
• The appliance must not be charged
while it is in a sink, on the edge of
a bath tub or in any other location
where it may be exposed to water or
risk falling in water.
MAIN COMPONENTS
1. Epilator head
2. Release button
3. On/Off button
4. Indicator light
5. Charging socket
CHARGING
• Insert the connector from the supplied
adapter into the charging socket (5)
on the appliance and then plug the
adapter into a mains socket.
• The indicator light on the appliance
comes on during charging. A full
charge takes 8 hours. Do not allow
the appliance to charge for more than
8 hours, as this may ultimately impair
battery performance.
• If the appliance starts to run slowly
during use, it needs recharging.
USE
Wash the skin and dry it thoroughly so
that it is completely dry.
Switch on the appliance on low or high
speed by pushing the on/off button (3)
forward. The drum in the epilator head (1)
starts to rotate.
Pull the skin taut with your free hand,
place the epilator head perpendicular to
the skin and slowly move the appliance
forward in the direction of hair growth.
The hairs on the skin are caught by the
drum and pulled out to leave the skin
smooth.
Once you have finished your treatment,
switch off the appliance using the on/off
button.
Rinse the skin with water and dry it thor-
oughly.
CLEANING
When cleaning the appliance, you should
pay attention to the following:
• Never submerge the appliance in
water and make sure no water enters
the appliance.
• Press the release buttons (2) and
remove the epilator head. Brush any
loose hairs off it and rinse it under
running water. Shake the water off it
and allow it to air dry. It must not be
refitted until it is completely dry.
• Charge the battery fully if the appli-
ance is not to be used for a prolonged
period.
1
2
4
3
5
