25
UK
5. Put the lid (4) on and turn it into place
so that it engages with the motor unit.
Note! The appliance cannot be turned
on unless it is correctly assembled.
6. Start the appliance at the required
speed by turning the on/off button
(10) to position 1 or 2. You can also
use the pulse function by turning the
on/off button to position P.
7. Once the food is ready, turn off the
appliance and turn the lid clockwise to
remove it.
CUTTING AND GRATING
1. Place the motor unit (1) on a flat
surface, e.g. a kitchen counter, and
make sure it is standing firmly.
2. Put the container (2) on the motor
unit.
3. Place the post (6) on the motor axle.
4. Secure the slicer/grater to the post.
Make sure it is the right way up.
5. Put the lid (5) on and turn it into place
so that it engages with the motor unit.
Note! The appliance cannot be turned
on unless it is correctly assembled.
6. Start the appliance at the required
speed by turning the on/off button to
position 1 or 2.
7. Place the foodstuffs in the feed tube
and push them towards the slicer/
grater using the plunger (9).
8. Once the food is ready, turn off the
appliance and turn the lid clockwise to
remove it.
CLEANING
When cleaning the appliance, you should
pay attention to the following:
• Unless clearly specified in the clean-
ing instructions below, please note
that none of the parts of this appli-
ance are dishwasher safe.
• Clean the appliance immediately after
use so that food residues do not dry
on to it.
• Remove the plug from the socket
before cleaning. Do not immerse the
motor unit of the appliance in water
and make sure no water gets into the
motor unit. Wipe with a well-wrung
cloth.
• Do not use scouring pads, steel wool
or any form of strong solvents or
abrasive cleaning agents to clean the
appliance, as they can damage the
external surfaces of the appliance.
• Disassemble the parts and wash
them in warm, soapy water.
• Make sure not to cut yourself on the
blades or slicer/grater while cleaning!
• IMPORTANT! Make sure the parts
are completely dry before using the
appliance again or storing it.
FOR UNITED KINGDOM ONLY
Plug wiring:
This product is fitted with a BS 1363 13-
amp plug. If you have to replace the fuse,
only those that are ASTA or BSI approved
to BS1362 and with a rated current of 13
amps should be used. If there is a fuse
cover fitted, this cover must be refitted
after changing the fuse. If the fuse cover
is lost or damaged, the plug must not be
used. You must also check if the socket
outlets in your home fit with the plug of
the appliance. If the socket outlet in your
home does not fit with the plug, the plug
must be removed and disposed of safely
as insertion of the plug into the socket is
likely to cause electric hazard. A replace-
ment plug should be wired according to
following description.
