32
8. Place a hand on the lid and switch
on the appliance by turning the on/
off button to the desired speed.
o ”1” is low speed and ”2” is high
speed.
9. The appliance also has a pulsing
option with extra speed.
o Turn the On/Off button to
“P” and hold it briefly in that
position.
o When you release the button, it
reverts to “0” and the appliance
stops.
10. You can add more food to the
blender jug during operation by
removing the lid cap and adding the
food through the opening. Always
switch off the appliance before
removing the plug and adding more
food.
11. Turn off the appliance by turning
the On/Off button to “0” when you
have finished blending. Wait until
the blade has come to a complete
stop before removing the lid.
12. Remove the blender jug by turning
it anti-clockwise and lifting it out.
13. The filter element can be turned
to three different positions when
you are pouring from the blender
jug: completely open, completely
closed and filtered opening (see the
symbols on the element).
NOTE:
• Do not leave the appliance running
for more than 3 minutes at a time.
Wait for 1 minute before turning the
appliance back on again.
• Always add liquid to the blender jug
when crushing ice cubes.
• The handle of the blender jug can
be removed during cleaning. Press
the handle down so it comes loose
from the jug and remove it. The
handle is installed again by pushing
the white pin back into the hole in
the bottom of the blender jug and
pushing the handle upwards.
Assembling and using the grinder
The grinder is intended for grinding
coffee beans and chopping nuts.
1. Place the motor section on a level
surface, e.g. a kitchen counter, and
make sure it is standing firmly on
the four suction cups underneath.
2. Place food in the grinder (19).
o NOTE: Do not completely fill
the grinder.
3. Make sure that the silicone ring
is fitted in the blade unit for the
grinder (18).
4. Fit the blade unit on the grinder and
tighten.
5. Place the assembled grinder onto
the motor section and turn the
grinder clockwise until it clicks into
place. (See arrows and locking
symbol on the motor part).
6. Connect the appliance.
7. Switch on the appliance by turning
the on/off button and keep turning
until you reach the required speed.
o
”1” is low speed and ”2” is high
speed.
8. Turn off the appliance by turning
the On/Off button to “0” when you
have finished using the grinder.
9. Remove the grinder by turning it
anti-clockwise and lifting it out.
