14
15
KEY
1. Beaters
2. Speed selector/Ejector button
3. Turbo function button
4. Handle
5. Dough hooks
6. Dough hook with a ring (to be inserted in the big
socket)
7. Sockets
8. Big socket
PRIOR TO FIRST USE
• Read the safety instructions through carefully.
• Before using the mixer, wash beaters, dough hooks
and bowl in warm soapy water. Rinse thoroughly
and dry.
INSTRUCTIONS FOR USE
Inserting beaters/dough hooks
Put the speed control at 0 (=off). Be sure cord is
unplugged from electrical outlet. Insert one beater/
dough hook at a time by placing stem end of beaters
into opening on bottom of the mixer. Press and twist
lightly until beater clicks into position.
Note: Beaters can be inserted in either socket, as the
beaters are identical.
The dough hooks are different. Make sure that the
dough hook with a ring is to be inserted in the big
socket, while the dough hook without a ring is to be
inserted in the small socket. Otherwise the dough will
climb up as the hooks are turning.
MIXING:
• Place beaters or dough hooks into the ingredients
before switching on to avoid splashes.
• Begin blending or mixing at a low speed.
• Follow recipe instructions for additional speeds.
• Ingredients can be added slowly during mixing.
• Turn off the mixer as needed. To scrape sides and
bottom of bowl with a plastic spatula.
• When mixing is completed, turn the unit to 0(=off)
and wait till beaters or dough hooks stop spinning
before remove the mixer from the bowl.
• If your mixing bowl is too full you will put an
excessive strain on the motor.
• For the right speed refer to the end of these
instructions.
Warning: Do not stick knife, metal spoons, fork and so
on into bowl when operating.
Note: Remove the beaters only at the 0 setting, make
sure the power cord is unplugged from the power outlet
before removing the beaters.
SPEED POSITION
Position means that the hand mixer is turned off.
Position 1-5 is different speeds.
Position 1 is the lowest speed and 5 is the highest
speed.
1
2
3
4
2
3
5
6
1
8
7
