15
KEY TO THE MAIN COMPONENTS OF THE
APPLIANCE
1. Detachable air concentrator
2. Speed selector
3. Foldable handle
4. Hanging Loop
Figure 1 Melissa 635139/135005/635224
1. Detachable air concentrator
2. Speed selector
3. Handle
4. Hanging Loop
5. Cool shot button
Figure 2 Melissa 635-140/151/154
/ 135-011/635-176/ 135-015
PRIOR TO FIRST USE
Check that you have removed all packaging
from your hairdryer.
USE
•
For the first time the appliance is used, it
may give off a small amount of smoke. This
is because an extra layer of protective oil on
the heating element is being heated up. This
is quite normal and not dangerous, and will
disappear after a short period of use.
•
To switch on the hairdryer, set the speed
selector (2) to one of the positions above
0. In the top two positions, the hairdryer
operates with full air flow, while in the first
position it operates with reduced air flow.
•
The detachable air concentrator (1) provides
concentrated air supply.
•
If you hold the cool shot button (5) in, the
hairdryer gives out cool air. This is useful
when your hair is dry and needs to be set.
(Melissa 635139 has no cool shot button)
•
To switch off the hairdryer, set the speed
selector to position 0. The hairdryer can be
hung up using the hanging loop (4) at the
bottom of the handle.
Please note: At low blower speed it is not
possible to alter the temperature.
CLEANING
•
Remove the plug from the socket for
cleaning.
•
Clean the appliance with a well-wrung
damp cloth and a little washing-up liquid, if
required. Wipe off with a dry cloth.
•
Occasionally remove any dust or hair from
the air intake using a brush.
ENVIRONMENTAL TIPS
Once any electrical product is no longer
functional, it should be disposed of in such a
way as to cause minimum environment impact,
in accordance with the regulations of your local
authority. In most cases you can take such
products to your local recycling station.
FOR UNITED KINGDOM ONLY
Plug wiring:
This product is fitted with a BS 1363 13-amp
plug. If you have to replace the fuse, only those
that are ASTA or BSI approved to BS1362 and
with a rated current of 13 amps should be used.
If there is a fuse cover fitted, this cover must be
refitted after changing the fuse. If the fuse cover
is lost or damaged, the plug must not be used.
You must also check if the socket outlets in your
home fit with the plug of the appliance. If the
socket outlet in your home does not fit with the
plug, the plug must be removed and disposed of
safely as insertion of the plug into the socket
is likely to cause electric hazard.
As this product is a class II appliance, the pin of
BS plug for earth connection is false.
1
2
3
4
5
2
3
1
4
