16 GB/IE
Start up / use
Q
Installation for HG00214A and
HG04214B (Fig. A‒B)
Fill the water container
7
up to the marking
MAX (inside wall) with distilled water.
Push the LEDs over the supply hose
1
to the
connection between the supply hose and the
decorative attachment. The LEDs must face in
the direction of the decorative attachments.
Note: For model HG04214B:
Push the LEDs
8
over the hose
12
. The LEDs
8
must face in the direction of the decorative
attachments
10
.
Note:
Put the supply hose
1
of the pump
3
in the supply nozzle
2
.
Put the decorative attachment with the base
plate
9
and the attached pump into the water
container and lead the power lead
5
through
the notch on the back of the base plate.
Note:
For model HG04214B:
Place the pebbles
11
on the decorative attach-
ment (Fig. B).
Your product is now ready for use.
Installation for HG04214C (Fig. C)
Fill the water container
7
up to the marking
MAX (inside wall) with distilled water.
Note:
The LEDs
8
are already pre-installed
over the hose
12
. After cleaning, push the
LEDs
8
over the hose
12
of decorative attach-
ment
10
. The LEDs
8
must face in the direc-
tion of the decorative attachments
10
.
Put the supply hose
1
of the pump
3
in the
supply nozzle
2
.
Put the attached pump
3
into the water con-
tainer
7
and lead the power lead
5
through
the back .
Your product is now ready for use.
Switching the product on / off
Plug the mains plug
6
into the mains. The
LEDs light up and water flows from the product.
Unplug the mains plug from the mains to turn
off the product.
Changing the water /
maintenance / cleaning / care
DANGER TO
LIFE BY ELECTRIC SHOCK!
Pull
the mains plug
6
out of the socket
before carrying out any work on the product.
Always use distilled water to avoid the build up of
lime scale!
Note:
Water can be evaporated during operating,
fill the water up to “MAX” when water level fall to
“MIN”.
Note:
To avoid the build up of algae you should
clean regularly change the water and and clean
the water container
7
and decorative attachment
10
at regular intervals - at least once a week.
For HG00214A and HG04214B
Base plate
9
and decorative attachment
10
are
inseparably connected to each other and form
one unit. Take this unit (
9
and
10
) from the
water container
7
.
Pull the supply hose
1
out of the supply
nozzle
2
.
After removing the supply hose
1
, then pull
off the LEDs
8
from supply hose
1
.
Note for model HG04214B:
Pull off the LEDs
8
from hose
12
.
Lie the unit of base plate
9
and decorative
attachmen
10
carefully aside together with the
LEDs
8
and pump
3
.
Carefully pour the water out from water con-
tainer
7
.
For HG04214C
Carefully pour the water out.
Pull the supply hose
1
out of the supply noz-
zle
2
.
Pull off the LEDs
8
from hose
12
.
Summary of Contents for 307032
Page 4: ......
