7
GB/IE/NI
switch the product off completely, unplug the
power adaptor
3
from the socket.
The LEDs are not replaceable.
If the LEDs fail at the end of their lives, the
entire product must be replaced.
RISK OF EXPLOSION!
Do
not use the product in explosive atmospheres
where flammable vapours, gases or dusts are
present.
Do not expose the product to any strong
vibrations or heavy mechanical stresses.
Make sure the 10 m lead wire
7
is not laid
down in areas where lawn mowers, trimmers,
scissors or similar cutting tools are used.
RISK OF INJURY!
Make
sure that, when the LED tree
8
is removed, the
base plate
1
and the ground spike
2
are
also removed, so that they do not present any
risk (e.g. risk of stumbling from the lead wire).
Installation
Note:
Remove all packaging materials from the
product.
Remove the individual parts from the packag-
ing and mount the product according to figures
A–E. The site for the LED tree
8
must be se-
lected in a way that it is erected on a solid,
level and vibration-free base. Anchor the LED
tree
8
firmly to the ground and make sure that
the tree is stable!
Assembly without ground spike
2
(see fig. A1):
Use four suitable screws and
dowels (not included) for the selected site
underground and mount the base plate
1
.
Make sure that the recess on the tube of the
base plate
1
does not apply to the recess
when fixing!
Installation with ground
spike
2
(see fig. A2):
Anchor ground spike
2
to the
ground and mount base plate
1
on it. When
fixing the stand pipe
5
on the pipe of the
base plate
1
, make sure to position the space
of the pipe exactly where the spike is fixed with
the screw.
Further steps for both types of
installation:
Attach stand pipe
5
to base plate
1
and
tighten Hexagon screw
6
with the help of
Hexagon key
4
(see fig. B).
Attach LED tree
8
to stand pipe
5
and
tighten Hexagon screw
6
with the help of
Hexagon key
4
(see fig. C).
Bend the individual branches of the LED tree
8
to the desired shape (see fig. D).
Plug the connector plug of lead wire into plug-
in power supply and tighten the screw connec-
tion, in order to prevent moisture from
penetrating inside. Then plug the power adaptor
3
into a socket (see fig. E).
Timer function
To switch on the timer function, press the timer
button
9
after the product is connected to the
socket of power supply. The timer button
9
will light up when the timer function is activated.
The LED tree
8
glows permanently for
6 hours and will be followed by a subsequent
pause of 18 hours. Afterwards, the LED tree
8
will light up again at its designated turn on time
for 6 hours followed by a subsequent pause of
18 hours.
To switch off the timer function, press the timer
button
9
again and the light of the timer but-
ton
9
will be turned off.
When the timer function is switched off, the
LED tree
8
glows continuously. To turn off the
product completely, the power adaptor
3
has
to be unplugged from the power socket.
Cleaning and care
DANGER OF ELECTRIC
SHOCK!
First pull the power adaptor
3
out of
the mains socket.
DANGER OF ELECTRIC
SHOCK!
For reasons of electrical safety the
product must never be cleaned with water or other
liquids or immersed in water.
