MELINERA 283750, Operation And Safety Notes

Page: 10 / 32

11 GB/IE
product off completely, unplug the mains
adapter from the socket.
The LEDs are not replaceable.
If the LEDs fail at the end of their lifes, the entire
product must be replaced.
Use
Note: Remove all packaging materials from the
product.
Note: The LEDs are connected in series. If one LED
is defective, up to ten LEDs may not light up.
Insert the plug on end of the product into the
socket of the mains adapter
3
. Please screw
down the connecting nut
4
clockwise.
Insert the mains adapter
3
into the mains socket.
The light set
1
is switched on.
Pull the mains adapter
3
out of the mains
socket to switch off the light set
1
.
Timer function
To switch on the timer function, press the timer
button
2
after the product is connected to the
socket of power supply. The timer button
2
will
light up when the timer function is activated.
The product lights glow permanently for 6 hours
and will be followed by a subsequent pause of
18 hours. Afterwards, the product will light up
again at its designated turn on time for 6 hours
followed by a subsequent pause of 18 hours.
To switch off the timer function, press the timer
button
2
again and the light of the timer but-
ton
2
will be turned off.
Cleaning and care
CAUTION! DANGER OF ELECTRIC SHOCK!
First pull the mains adapter
3
out of the mains socket.
CAUTION! DANGER OF ELECTRIC SHOCK!
For reasons of electrical safety the product must
never be cleaned with water or other liquids or
immersed in water.