MELINERA 100 LED SOLAR FAIRY LIGHTS 2X5M, Assembly, Operating And Safety Instructions, Page: 11 / 59

11 GB
Installation (see Fig)
1. Insert the pole
6
into the ground spike holder
4
and insert
the ground spike
7
in to the pole
6
.
2. Push the stake into the ground (lawn, flower bed, etc.).
3. You can fix the product on the desired surface, twist on the
tree or railing by using the mounting material such as cable tie
(mounting material is not included).
Note: Ensure the product is stable. Do not use force when
assembling or setting up the prod uct e.g. hammer blows. This
will damage the product.
Note: For the best results, put the product in a place where
the solar panel
5
is exposed to di rect sunlight for as long as
possible. Do not put the product under bushes, trees, canopies
etc. as this reduces the incidence of incoming sun light. Position
the product in such a way that the solar panel
5
is not cov-
ered or in the shade.
Note: Make sure the solar panel
5
is not impacted by other
light sources, e.g. yard- or street light ing, or the product will
not switch on at twilight.
Timer function
1. To switch on the timer function, press and hold 3 second the
Mode button
1
after the product is connected to the socket
of solar panel
3
. The Mode button
1
will light up green
when the timer function is activated.
2. The product will automatically light on as it begins to get dark.
Once get bright light or light up for 6 hours, the product will
turn off. Afterwards, the product will light up 6 hours again
when get dark and then turn off again.