Thank you for choosing a Meliconi remote control.
The CONTROL 2 Simple remote control is designed to command a TV and a DECODER (satellite or digital terrestrial).
CONTROL 2 Simple is a simplified remote control; it provides ONLY the functions on the keypad.
IMPORTANT!
When the remote control is set to control only the TV, all the buttons will control the TV; whilst when it is set to
control 2 devices (TV + DECODER), only the
black
buttons will control the TV, whilst the
white
buttons will control the
DECODER.
The remote control has a permanent memory, so it does not lose its settings even if there are no batteries in it.
The remote control requires 2 new 1.5V
AAA/LR03
alkaline batteries, not included in the
package. Insert with the correct polarity as shown in figure.
DO NOT use
rechargeable
batteries.
BATTERIES TEST:
Press and hold the
ON/OFF
[
]
button and check that the indicator light
remains on continuously until the button is released. If the light is off or blinks, the inserted
batteries are low, therefore they need replacement.
Before using the remote control, for each device you wish to control, it is
essential
to set a
specific code
, it matched.
Identify the specific code and set it into the remote control using one of the following ways:
Go to the website listed above, or use the
qr-code
on the side, to access online tool SEARCH
ACTIVATION CODE.
Once you have found the specifi c code for your device, set it in the remote control as described
in the
ENTERING THE CODE DIRECTLY
chapter.
BRAND
RESEARCH
MOBILE (SMS)
INTERNET
SETTING VIA INTERNET
ACTIVATION OF REMOTE CONTROL
Do not leave exhausted batteries inserted, as liquid may leak and damage the remote control
INSERTING THE BATTERIES
SAFETY WARNINGS
The remote control must not be exposed to excessive heat sources or fire.
The product
is not a toy
. Keep out of reach of children or domestic animals.
Keep this booklet for future reference
