The new Zigbee 3.0 LED dimmer, 150W MAX with LED (Trailing edge control). Push Button Bell
Press model. Works with Hue/Google home/ Echo plus ALEXA
Product Information
CODE: ML-ST-BP-DIM
Dimming method:
Trailing edge phase control
Electronic short circuit
protection:
Yes
Over current protection
Yes
Over temp. protection
Yes
Rated voltage
AC 220-240V, 50Hz
Load:
5-150W
Type of loads:
Dimmable LED luminaires
Platforms:
IOS or Android for wireless
operation - Zigbee 3.0
Compatible gateways
Philips HUE, Amazon Echo Plus,
Google Home, Samusng Smart
Thing
Temperature range:
0-40 °C
Dimensions:
23x23x43mm
Weight:
0.025kg
Warranty:
3 Years
Kit Includes:
1 × dimmer
1 × User Manual
TECHNICAL INFORMATION
Data subject to change, please visit our website for upto date specifications:
melec.com.au
T. 1300 222 445 | www.melec.com.au
For further information about our Warranties please go to:
melec.com.au/legal/warranties
INSTALLATION / WIRING DIAGRAM
DISCONNECT MAINS BEFORE PROCEEDING
1. Remove existing wall switch/dimmer and disconect the cables
2. Connect first Stitchy BP dimmer's cable to the active cable (L)
3. Connect second Stitchy BP dimmer's cable to the switched cable
(going to the LED luminaire)
4. Press Stitchy BP dimmer into the switch face plate and reinstall
onto the wall.
5. Re-connect mains and test operation.
CONNECTION WITH HUE BRIDGE:
Short press 5 times within 5 seconds to connect the HUE link push. Continue in App to discover new lights.
SETTING MINIMUM BRIGHTNESS LEVEL:
Adjust to required minimum brightness then short press 3 times within 5 seconds to save minimum level. LED will flash 3 times
confirming settings are saved.
TURNING ON/OFF BLUE GLOW BACK LIGHT:
Short press 7 times within 5 seconds.
RESETING TO FACTORY SETTINGS:
Short press 9 times within 5 seconds. LED will flash 3 times confirming reset.
SETUP / OPERATION
AC 240V
LED Load
Stitchy BP
Dimmer
L
N
BP Dimmer
BECOME A
ACCREDITED INSTALLER
