Brightness level button
Select zone from . Press , the corresponding zones will be 25% brightness. Press ,
the corresponding zones will be 50% brightness. Press , the corresponding zones will be 75%
brightness. Press , the corresponding zones will be 100% brightness.
Save and recall button
select zones from
adjust the color
temperature
and
brightness
long press one save button
from for 2-3 second
LED lighting flash twice
indicate save successful
a. Save Color temperature:
b.
then short press save button
Recall: select zone button which we want recall from ,
S1
S2
S3
S1
S2
S3
Safety & Warnings
1) The product shall be installed and serviced by a qualified person.
2) IP20. Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
4) Please check if the output voltage of any LED power supplies used complies with the working voltage of the
product.
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
6) Please ensure that the cable is secured tightly to the connector.
7) For latest information please visit our website www.melec.com.au.
Warranty Agreement
1) We provide lifelong technical assistance with this product:
5 year warranty. Every product has printed date on, for example: 1125 means year 2011, week 25.The warranty
is for free repair or replacement and covers manufacturing faults only. For faults beyond the 5-year warranty we
reserve the right to charge for time and parts.
2) Warranty is void if:
Any defects are caused by wrong operation.
Any damages are caused by unauthorized removal, maintenance, modifying, incorrect connection and
replacement of components.
Any damages are due to transportation, vibration etc. after purchase.
Any damages are caused by earthquake, fire, lightning, pollution and abnormal voltage.
Any damages are caused by negligence, inappropriate storing at high temperatures and humidity or near
harmful chemicals.
Product has been updated or changed.
3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
Factory Reset
By pressing & holding the learning button on the ML-1009FAWI for over 5 seconds the connected LED Light will
flash, All previous Remote controls have now been deleted.
