GDB-5K30
Instructions Manual
４－３．Setting HOLD CURRENT SELECT switch
A high setting value may cause burn on the
skin due to overheating of the motor.
Do not select a high value beyond the
required.
HOLD CURRENT is set up with the HOLD I. SEL switch.
The ratio of HOLD CURRENT to DRIVE CURRENT can be selected.
(1)
●Ratio of HOLD CURRENT.
HOLD CURRENT
DRIVE CURRENT
（Factory setting）
●
HOLD CURRENT changes relative to DRIVE CURRENT setting.
The ratio of HOLD CURRENT [100%] represents the same as the setting for DRIVE CURRENT.
●The greater the ratio of HOLD CURRENT grows, the more heat the motor
generates when is on holding-state.
20
25
４
５
DRIVE I.SEL〔No.0～No.F〕
0
5
10
15
０
１
HOLD I.SEL No.
Ratio of
HOLD CURRENT(%)
Ｅ
90
Ｆ
100
Ｃ
70
Ｄ
80
Set the HOLD I.SEL switch No. to the ratio of HOLD CURRENT to DRIVE CURRENT
required.
Ratio of HOLD CURRENT（％）＝
×100
Ａ
50
Ｂ
60
６
30
８
９
40
45
７
35
２
３
CAUTION
-17-
