Melec ADB-2F40B, Instruction Manual

Page: 13 / 45

ADB-2F40B
Instructions Manual
３－５．Operating Section
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
Sub adjustment switch Use it with ON.
〔ON(IH)〕
Sub adjustment switch Use it with ON.
Sub adjustment switch Use it with ON.
Name of Operating Section Function
Factory Setting
Sub adjustment switch Use it with ON.
HOLD SWITCHING TIME
SELECT switch DRIVE/HOLD CURRENT automatic switching
time is selected.
〔OFF(150ms)〕
PULSE INPUT TYPE SELECT
switch
Selects a pulse input type. 〔OFF(2P)〕
Sub adjustment switch 1：〔OFF〕
STEP ANGLE SELECT switch SA：〔OFF〕
Sub adjustment switch
Sub adjustment switch
Use it with OFF.
Use it with OFF.
2：〔OFF〕
STEP ANGLE SELECT switch
HOLD CURRENT SELECT switch
H1：〔ON〕
Selects HOLD CURRENT.
H2：〔OFF〕
Name of Operating Section Function
HOLD CURRENT SELECT switch
STEP TABLE switch Selects STEP TABLE.
Name of Operating Section Function
Factory Setting
Factory Setting Name of Operating Section Function
DRIVE CURRENT
SELECT switch
〔No.3〕 Selects DRIVE CURRENT.
Use it with OFF.
Factory Setting
〔ON(5S)〕
SC：〔OFF〕
SB：〔ON〕
3：〔OFF〕
Factory Setting
4：〔OFF〕
Selects a step angle. STEP ANGLE SELECT switch
Sub adjustment switch Use it with OFF.
Name of Operating Section Function
-13-