EMT16_MOS_v11_EMT16_Handout.pub 19 Rev: 080515
EMT16 has a laser alignment feature. This feature allows you to line up an embroidery design to
a mark, such as a stripe, on the garment. To do this, you use the hoop and the arrow keys to
move the laser to your first reference point, like the top of stripe on the left side. Press the laser
and an arrow key to confirm this point. Move the laser with the hoop and arrow keys to your
second reference point. Press the laser and an arrow key to confirm this point. Now, press the
laser and the center key. The design will align to the line created by your two reference points.
The placement of the design along the line will depend on the arrow keys used to input the ref-
erence points. The three variations follow.
1. Laser + Left
2. Laser + Right
1. Laser + Left
2. Laser + Left
1. Laser + Right
2. Laser + Left
+
+
+
+
+
+
+
+
+
Moving Through a Design
EMT16 Laser Alignment
