SARK
SARK
SARK
SARK-
-
-
-110
110
110
110
User’s Manual
Rev 1.0 March 15
th
, 2013
- 13 -
© EA4FRB 2011-2013
pressing the button Select [
■
] when the «Preset» option is active; see screenshot
below:
The Navigator B is used to navigate the desired option. The selection is validated
by pressing the button Select [
■
]. Pressing any other button will cancel the setting.
3.6 Using Markers
The SARK-110 has two markers that can be either manually positioned by the
user or operate in an automatic tracking mode. The markers indicate the
horizontal and vertical position of the point they are positioned on. The horizontal
position of a marker is shown by a dotted vertical line which extends from the top
to the bottom of the measurement diagram. The markers information window, in
blue background, shows the frequency or distance (in cable test mode) and the
two values corresponding to the plotted values at each of the markers.
The marker cursor position is selected with the Navigator B when the active menu
option in the main menu is «Marker1» or «Marker2».
