HOW TO USE
1.
Make sure the power switch is in the “0” position. Insert the plug into outlet and turn on the
power switch after testing.
2.
Set the switch position to “2” and “
Ⅲ
” to dry hair.
3.
Set the switch position to “2” , “
Ⅲ
” or “1”, “
Ⅰ
”, “
Ⅱ
” to style a fashion.
4.
Set the switch position to “0” , unplug the plug then. Perform the hair dryer cool for 10 to 15
minutes before hanging it over the wall-mounted equipment.
Cool shot
:
With this switch it is possible to interrupt the heating process so that the air can be mixed according
to individual requirements.
USER MAINTENANCE INSTRUCTION
This hair dryer maintenance is free, no consumption or lubrication is needed. Keep this appliance
clean for proper operating. Never block or clog air intakes, otherwise overheated will be happen.
The appliance has no user serviceable parts, any other servicing should be performed by an
authorized service representative or a professional center. Never allow the supply cord to be twisted,
pulled, bent, or wrapped around the dryer. If the cord is twisted, to untwist the cord before use. When
not in use, this appliance should be stored in a safe, dry location, out of reach of children.
CONCENTRATOR
DIFFUSER
COOL SHOT FUNCTION
HEATS
SPEEDS
HANGING-UP LOOP
