8 Settings
25
4.
Press
repeatedly in order to leave the menu.
PLEASE NOTE
The extent to which individual components in the sealing device expand is altered upon
temperature changes. This also influences the sealing force. To this end, the sealing
force thresholds are automatically adapted to the changed sealing temperature.
Signal tones
In order to switch off the signal tones where necessary, proceed as follows:
ü
You are in the menu
Settings
>
Tone
.
1.
Press
OK
to confirm. The display flashes.
2.
Press
or
to switch the signal tones on or off.
3.
Press
OK
to save the settings.
4.
Press
repeatedly in order to leave the menu.
User administration
See also “Documentation and User Administration”.
Video tutorial
In order to guarantee exact traceability over every sealing procedure, you can select the respective user
before sealing. Proceed as follows:
1.
Switch on the sealing device at the power switch and wait until the temperature is issued on the
display.
2.
Press
repeatedly in order to navigate to
User
.
3.
Press
OK
to confirm. The display flashes.
4.
Press
or
to select up to ten users.
5.
Press
OK
to save the settings.
Ê
The display returns to the initial state.
PLEASE NOTE
We recommend that you draw up an overview in your QM documents from which you can
find the allocation of each user for the sealing device.
Example of a user overview
The name of the trained
member of staff
User name in the sealing
device
Signature
Ms
User 01
...
Ms
User 02
...
