MEITRACK T633G User Guide
Copyright © 2019 Meitrack Group All rights reserved. - 12 -
Description:
Consecutive driving time: The parameter value ranges from 0 to 1000. The default value is
240
. Unit: minute.
Alert time: The parameter value ranges from 0 to 60000. The default value is
300
. Unit: second.
ACC off time: The parameter value ranges from 0 to 1000. The default value is
20
. Unit: minute.
If you want to read fatigue driving parameters, send
0000,B15
.
Example:
Sending: 0000,B14,180,5,120
Reply: 353358017784062,B14,OK
6.6.4
Setting the Driving License Type – C50
SMS sending: 0000,C50,
Driving license type 1
,
Driving license type 2
,…
Driving license type n
SMS reply: IMEI,C50,OK
Description:
Driving license type: The parameter value ranges from 0 to 65535. At most 16 types of driving licenses are supported.
The default parameter value is
0
, indicating that no driving license type is set.
If you want to read all types of driving licenses, send
C50
.
After a new parameter value is set, the existing parameter values will be deleted.
Example:
Sending: 0000,C50,24,12
Reply: 353358017784062,C50,OK
6.6.5
Setting the Duration of Buzzing – C51
SMS sending: 0000,C51,
Time
SMS reply: IMEI,C51,OK
Description:
Time: indicates the maximum duration that the buzzer sounds. Unit: minute; value range: 0–255; default value: 10.
When the parameter value is
0
, the buzzer will sound all the time once it is pressed.
Example:
Sending: 0000,C51,10
Reply: 353358017784062,C51,OK
For details about SMS commands, see the
MEITRACK SMS Protocol
.
Note:
1.
The default SMS command password is
0000
. You can change the password by using Meitrack Manager and
SMS command.
2.
The device can be configured by SMS command with a correct password. After an authorized phone number is
set, only the authorized phone number can receive the preset SMS event report.
7
Logging In to MS03 Tracking System
Visit http://ms03.trackingmate.com, enter the user name and password, and log in to the MS03. (Purchase the login
account from your provider.)
For more information about how to add a tracker, see the
MEITRACK GPS Tracking System MS03 User Guide
(chapter
4 "Getting Started").
The MS03 supports the following functions:
