MEITRACK T400G TPMS Scheme User Guide
Copyright © 2019 Meitrack Group All rights reserved. - 9 -
5
Device Installation
5.1
Installing GPS and 3G Antennas
3G antenna
GPS antenna
Connect the 3G antenna to the tracker's connector which is labeled "GSM". The 3G antenna is non-directional, so
you can hide it in any place of a vehicle.
Connect the GPS antenna to the tracker's connector which is labeled "GPS". It is recommended that the GPS antenna
should face up to the sky and the side of the GPS antenna with words should face downwards. Please secure the GPS
antenna by using double sided tapes.
Note: Do not install the GPS antenna at a metal covered place. You are advised to install the GPS and 3G antennas as
shown in the following figure.
5.2
Installing the I/O Cable
The I/O cable is a 12-pin cable, including the power, analog input, digital temperature sensor input, positive input,
negative input, and output ports.
