MEITRACK T400G TPMS Scheme User Guide
Copyright © 2019 Meitrack Group All rights reserved. - 31 -
8
Querying Tire Pressure Data by LCD Display (Optional)
Besides the MS03 web platform and app, you can use the LCD display to receive tire pressure data after its coding is
completed.
8.1
LCD Display Introduction
(1) The LCD display has an internal battery. It can also be supplied power with an external power supply.
(2) When the LCD display does not detect vibration for 10 consecutive minutes, it will enter the sleep mode
automatically. This helps save battery power. When it detects vibration, it will be woken up and will start to receive
data.
(3) LCD display appearance
(4) LCD display keys
No.
Key
Function Description
1
Power button
The key is on the left of the LCD display and used to power on or power
off the LCD display.
2
LINK
Used to clear the ID numbers of configured tire pressure sensors.
3
SET
Used to confirm.
4
CODE
Used for code matching.
5
+ / -
Used to select a tire pressure sensor's ID number.
8.2
LCD Display Configuration
To determine which tire pressure data is showed on the LCD display, you need to set code matching.
8.2.1
Auto Code Matching
In standby mode, press and hold down the
CODE
key of the LCD display for 3 seconds. When you hear "Bi" once,
release the key. Then the system will enter code matching mode and the icon of the tire requiring code matching will
blink on the LCD display. Press the
+
or
-
key to select the tire's location, place the bottom of the LCD display close to
the tire pressure sensor requiring code matching, and press the
CODE
key. The sensor will start to match a code.
Then "IDLF" will be showed on the LCD display, and the red LED indicator will be steady on. If the LCD display receives
