MEITRACK T322X User Guide
Copyright © 2016 Meitrack Group All rights reserved.
- 9 -
6.2
LED Indicator
GSM indicator (green)
Power indicator (red)
GPS indicator (blue)
Use any of the following ways to start the device:
Press and hold down the power button for 3–5 seconds.
Connect the device to a computer by using a USB cable.
Connect the device to an external power supply.
Note: When the device is being charged with a USB cable or by external power supply, it will operate normally. To restart the
device, just press and hold down the power button.
GPS Indicator (Blue)
Steady on
The GPS antenna is faulty.
Steady off
The GPS stops.
Blink (0.5 seconds on and 2.5 seconds off)
The GPS is valid.
Blink (1 second on and 2 seconds off)
The GPS is invalid.
GSM Indicator (Green)
Steady on
A call is coming in or a call is being made.
Steady off
The SIM card is not inserted or is faulty.
Blink (0.5 seconds on and 2.5 seconds off)
The GSM signal is received.
Blink (1 second on and 2 seconds off)
The GSM signal is not received.
Power Indicator (Red)
Steady on
The device is charging.
Blink (0.5 seconds on and 2.5 seconds off)
The device works normally.
Blink (1 second on and 2 seconds off)
The device power is low.
6.3
Configuring Device Parameters by Meitrack Manager
This section describes how to use Meitrack Manager to configure the device on a computer.
Procedure:
1.
Install the USB-to-serial cable driver and Meitrack Manager.
2.
Connect the device to a computer with the USB-to-serial cable.
