MEITRACK T322X User Guide
Copyright © 2016 Meitrack Group All rights reserved.
- 12 -
Sending: 0000,A71,13811111111,13822222222,13833333333
Reply: 353358017784062,A71,OK
6.5.2
Setting Anti-Theft (Arming/Disarming)
You can set anti-theft by SMS command, call, or platform command.
Note: You can use a buzzer (optional accessory) to enhance the anti-theft protection. Set an authorized phone number to
ensure that SMSs and calls can be received when a vehicle is stolen.
Set by smart voice: Dial the device's SIM card number by using an authorized mobile phone number to set the smart voice
function. After dialing, the following voice prompt is played: "Hello. Arming, press 1; disarming, press 2; query arming
status, press 3; query a location, press 4; listen-in, press 5. Thank you." Then you press 1 to set arming.
Set by SMS command: Set arming or disarming by SMS command.
SMS sending: 0000,B21,Status
SMS reply: IMEI,B21,OK
Note:
When
Status
is
1
, enable the anti-theft function. While arming, opening the vehicle door and starting the ACC are
not allowed. Otherwise, the device will send an alarm SMS and make a call to the preset authorized phone number.
When
Status
is
0
, disable the anti-theft function. While disarming, all anti-theft alarms will be cleared. The device is
in disarming state by default.
Function
Call
SMS
Engine
Cut
Buzzer
Remarks
Opening
the
vehicle
door
√
√
√
When the vehicle door is opened without permission, the buzzer
will sound continuously until the anti-theft state is cancelled. The
device will dial the three authorized phone numbers in sequence
and send SMSs.
Starting the engine
√
√
√
√
When the engine is started, the vehicle fuel will be cut off, and the
buzzer will sound continuously until the anti-theft state is
cancelled. The device will dial the three authorized phone numbers
in sequence and send SMSs.
Setting arming
while
driving (Intercepting the
moving vehicle )
√
√
After the vehicle is stolen, you can send a GPRS/SMS command to
intercept the moving vehicle. When the vehicle speed is lower than
5 km/h, the engine will be cut off, and the device will send an alarm
to authorized phone numbers.
Towing alarm
√
√
√
When the ACC is off and vibration occurs continuously, a towing
alarm will be generated. The device will dial the three authorized
phone numbers in sequence and send SMSs.
Engine cut: Output ports are activated, implementing the remote fuel/power cut-off function. For details, see section 8.2.5
"Remote Power Cut-off."
For details about SMS commands, see the
MEITRACK SMS Protocol
.
Note:
1.
The default SMS command password is
0000
. You can change the password by using Meitrack Manager and SMS
command.
2.
The device can be configured by SMS commands with a correct password. After an authorized phone number is set, only
the authorized phone number can receive the preset SMS event report.
