MEITRACK T311 User Guide
Copyright © 2014 Meitrack Group All rights reserved. - 11 -
2.
The T311 can be configured by SMS commands with a correct password. After an authorized phone
number is set, only the authorized phone number can receive the preset SMS report.
5.4.2
Setting a Function Phone Number
SMS sending: 0000,A71,
Phone number
1,
Phone number
2,
Phone number
3
SMS Responding: IMEI,A71,OK
Description:
A function phone number has a maximum of 16 bytes. Phone numbers are empty by default.
Set phone number 1 to an SOS phone number. When the tracker is called by using the phone number, SMSs of
locations, geo-fence alarms, low power alarms, and speeding alarms are received, and calls and SMSs of car
towing and stealing alarms are received.
If all function phone numbers need to be deleted, send
0000,A71
.
When the SOS button is pressed, the tracker dials phone numbers 1, 2, and 3 in sequence. The tracker stops
dialing when a phone number responds.
Example: 0000,A71,13811111111,13822222222,13833333333
Responding: 353358017784062,A71,OK
5.4.3
Arming/Disarming
SMS sending: 0000,B21,
Status
SMS Responding: IMEI,B21,OK
Description:
When
Status
is
1
, enable the arming function. In arming state, activating the engine is an unauthorized
operation. If the operation is performed, the tracker will send an alarm SMS to the preset authorized phone
number.
When
Status
is
0
, disable the arming function. In disarming state, all anti-theft alarms will be cleared.
For details about SMS commands, see the
MEITRACK SMS Protocol
.
5.5
Remote Control Functions
5.5.1
Definitions of RF Remote Control Keys
Function
Key
Current Vehicle State
Description
Arming
Key
Disarming state/ACC OFF
Press the key when the engine stops. If the buzzer sounds “beep”
once, the vehicle enters the arming state. In this state, a vehicle
stealing alarm will be generated if the vehicle vibrates and starts.
