MEITRACK K211G GPS Smart Lock User Guide
Copyright © 2018 Meitrack Group All rights reserved. - 5 -
Communication diagram
K211G Working Mode
Status
LoRa connected
The GPS and GSM modules of the K211G enter the sleep
mode, and its lock status information and alerts will be
uploaded to the server through the T399G.
LoRa
disconnected
Deep sleep mode (send heartbeat
packets once every one hour)
After the K211G is started properly, if no event is triggered,
the K211G will enter the deep sleep mode after five minutes
(default time). The wakeup conditions include vibration,
swiping RFID cards and sending heartbeat packets.
Sleep mode disabled
Report data at the preset interval.
2.1.2
Locking or Unlocking the K211G
Locking or Unlocking by Swiping RFID Cards
The function is used to lock or unlock the K211G by swiping authorized RFID cards. When you swipe an RFID card,
the K211G will automatically detect and record the unlocking time, location and RFID card number, and these data
will be sent to the server.
Operation process: Put the authorized RFID card on the K211G's card swiping area. When the K211G detects this
action, the buzzer will beep and the LVS LED indicator will be steady on, indicating that the K211G is unlocked. In this
way, the last step for you is to pull out the lock rope. (To lock the K211G, you only need to swipe the RFID card once.
Then the buzzer will beep and the LVS LED indicator will be off, indicating that the K211G is locked.)
