meitav-tec Haften TRE24-PROG-HC11, Installation And Operating Instructions Manual, Page: 10 / 16

10
6. Technician Settings
To offset the Room temperature readings- when needed:
• Adjust the set-point temperature for cooling to 10 ° C.
•
Wait until display returns to normal.
• Press and hold the “Select” button (5 sec.) –“Offs” and the OFFSET temperature will
appear on display (a number between –6…+6). The offset is used to calibrate the
measured Room temperature- when needed.
•
Adjust the Offset for Room temperature readings using the “+” and “-“ buttons
between –6 ° C and +6 ° C (default = 0 ° C).
• Press the “Select” button again to return to normal display.