meitav-tec ETN-24-HC11-3S-PROG, Installation And Operating Instructions Manual, Page: 8 / 16

8
6.5 Programming
The thermostat is a 5-1-1 programmable; weekdays Monday through Friday, Saturday and
Sunday both have individual programs.
There are four program events per day: 1-Wake, 2-Day, 3-Return, 4-Sleep
Switch between Programmable/Non Programmable configurations
The ETN-24-HC11-3S-PROG (U.S Program-Celsius) is a Programmable thermostat by
default. To switch to a Non Programmable configuration the remote control MUST be used
(see instructions below).
Programming defaults from the factory.
Monday to Friday 1 (Wake) 2 (Day) 3 (Return) 4 (Sleep)
Start time 7:00 AM 8:30 AM 5:00 PM 10:30 PM
Set-point for cool
23
°
C 25
°
C 23
°
C 30
°
C
Set-point for heat 19
°
C 15
°
C 20
°
C 05
°
C
Saturday 1 (Wake) 2 (Day) 3 (Return) 4 (Sleep)
Start time 7:00 AM 8:30 AM 5:00 PM 10:30 PM
Set-point for cool
23
°
C 25
°
C 23
°
C 30
°
C
Set-point for heat
19
°
C 15
°
C 20
°
C 05
°
C
Sunday 1 (Wake) 2 (Day) 3 (Return) 4 (Sleep)
Start time 7:00 AM 8:30 AM 5:00 PM 10:30 PM
Set-point for cool 23
°
C 25
°
C 23
°
C 30
°
C
Set-point for heat
19
°
C 15
°
C 20
°
C 05
°
C
Important:
•
While modifying the program you can quickly switch between days by pressing the
“On/Off” button.
•
Press the “Select” button to exit the program.
•
If no key is pressed for 30 seconds, the thermostat will return to normal display.