• If necessary, wear hand, eye and ear
protection.
• Switch the machine on immediately
before contact with workpiece.
• Never lay the machine aside when it
is still running.
• Secure workpiece with clamps etc.
• Never use cutting disks for rough
grinding.
• Always store and handle grinding
disks carefully in accordance with the
manufacturer’s directions.
• Check disks before using them. Never
use chipped, cracked or otherwise
damaged products.
• Ensure that grinding tools are
mounted according to the
manufacturer’s directions.
• Always use spacers or shims if these
are supplied with the grinding tool or
if they are specified.
• Ensure that the grinding instrument is
properly attached and secured prior to
use and run the tool at idle speed for
1 minute in a safe location. Stop
immediately if considerable vibrations
occur or if other faults are determined.
If these symptoms occur, check the
machine to determine the cause.
• Never use separate reducing sleeves
or adapters to fit grinding disks with
large holes.
• With grinding tools with thread
insert, ensure that the thread is long
enough to take the full length of the
spindle.
• Ensure that flying sparks do not cause
danger, e.g. to other persons or by
igniting inflammable substances.
• During dusty work, ensure that the
ventilation slits are kept free. If dust
has to be removed, first disconnect the
power tool from the power supply. Use
non-metallic objects and avoid
damaging interior parts of the machine.
• The disk continues to run after the
machine is switched off. Do not lay
the machine aside until the disk has
come to rest.
• Always protect eyes and ears.
• Other personal safety equipment, e.g.
dust mask, gloves, helmet and clothing
(e.g. apron) should also be worn.
This unit may not be used by people
(including children) with reduced
physical, sensory or mental capacities,
with a lack of experience and without
the appropriate knowledge, unless they
are supervised by someone who is
responsible for their safety or have been
instructed by such a person with regard
to how the unit is to be operated.
Children should be supervised to ensure
that they do not play with the device.
Safety symbols
The symbols on the housing have the
following meanings:
Do not dispose of with
domestic waste!
59
5455320-Winkelschl_man 08.05.15 13:49 Seite 59
