35
• Only use the additional handles
supplied with the unit. Loss of control
of the unit may lead to injuries.
• Hold the tool by the insulated handle
surfaces when carrying out tasks
during which it is possible that the
tool will come across hidden power
cables or its own cable. Contact with
a power-carrying cable can also put
metal parts of the unit under power
and cause an electric shock.
Safety marking
The symbols on the housing mean the
following:
Type No. and year of
manufacture
Type designation
Motor
Idling speed
Do not dispose of with
domestic waste!
Important! Observe
operating instructions!
Always protect eyes and
ears.
Wear a light breathing
protection mask
„Tested Safety“ voluntary
quality mark
Housing is double insulated
CE Mark (conformity to
European safety standards)
Manufacturer’s address
7 – Installation and setting
Inserting bit/tool
WARNING! Pull out power plug!
The drill has a quick-action chuck for
changing tool manually without a key.
Grasp the drill by the rear chuck ring.
Turn the front ring to the left to open the
chuck. Insert the bit and fix in position by
turning the front ring to the right (Fig. 2).
Selecting speed
WARNING! Pull out power plug.
The speed selector
allows you to adjust
the number of
revolutions of the tool to the type of
material being drilled.
• Turn the speed selector on the On-Off
switch (5) in the (–) direction. The
maximum number of r.p.m. is
reduced.
• Turn the speed selector in the (+)
direction: The number of r.p.m. is
increased up to the maximum speed.
With the On-Off sliding switch the
number of r.p.m. can be varied
continuously within the selected
maximum speed.
I
0
5452160-Schlagbohr-man 15.01.14 09:26 Seite 35
