49
a cord suitable for outdoor use
reduces the risk of electric shock.
f
If it is not possible to avoid
using the electrical tool in a
damp environment, use a
residual current circuit-breaker.
The use of a residual current
circuit-breaker reduces the risk of
an electrical shock.
3 Personal safety
a
Stay alert, watch what you are
doing and use common sense
when operating a power tool. Do
not use a power tool while you
are tired or under the influence
of drugs, alcohol or medication.
A moment of inattention while
operating power tools may result in
serious personal injury.
b
Use personal protective
equipment. Always wear eye
protection.
Protective equipment
such as dust masks, non-skid
safety shoes, hard hat, or hearing
protection used for appropriate
conditions will reduce personal
injuries.
c
Prevent unintentional starting.
Ensure the switch is in the off-
position before connecting to
power source and/or battery
pack, picking up or carrying the
tool.
Carrying power tools with
your finger on the switch or
energising power tools that have
the switch on invites accidents.
d
Remove any adjusting key or
wrench before turning the
power tool on.
A wrench or a key
left attached to a rotating part of
the power tool may result in
personal injury.
e
Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the
power tool in unexpected
situations.
f
Dress properly. Do not wear
loose clothing or jewellery.
Keep your hair, clothing and
gloves away from moving parts.
Loose clothes, jewellery or long
hair can be caught in moving
parts.
g
If devices are provided for the
connection of dust extraction and
collection facilities, ensure these
are connected and properly used.
Use of these devices can reduce
dust related hazards.
4 Power tool use and care
a
Do not force the power tool.
Use the correct power tool for
your application.
The correct
power tool will do the job better
and safer at the rate for which it
was designed.
b
Do not use the power tool if the
switch does not turn it on and
off.
Any power tool that cannot
be controlled with the switch is
dangerous and must be repaired.
c
Disconnect the plug from the
power source before making any
adjustments, changing
5452980-Stemm-Abbr_man 10.01.17 10:41 Seite 49
