INSTRUCTION MANUAL
32
Do not roll up the cable, pull on it to unplug the appliance or use it to wrap up the product. Keep the cable away
from heated surfaces.
Never use this appliance if its cable or plug are damaged, or if it is operating incorrectly. If the power cable
is damaged, do not use your appliance and take it to an authorised technical assistance centre to be replaced.
1.3. HUMIDITY AND WATER
Do not allow water to pool on your appliance, as this could be dangerous. TO AVOID DANGER OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THE APPLIANCE TO WATER OR HUMIDITY. Do not place the appliance under
water (for example, for washing).
1.4. CLEANING
- Let the hob cool and clean it completely, as dirt can be very difficult to remove when reheated.
- Use products that are suitable for cleaning glass-ceramic hobs.
- Do not use abrasive sponges or powder detergents that could scratch the glass surface.
- Do not use oven cleaning spray, as it is very aggressive and could damage the glass surface.
- The glass-ceramic hob should not be cleaned using steam or other similar methods.
- To remove minor dirt, use hot water and a little detergent, rinse with clean water and dry with a soft cloth
or paper.
- Remove any residual detergent, as it could damage the glass when hot.
- The use of an adequate spatula for cleaning glass is recommended for severe build-ups (see figure 51).
- Warning: If plastic objects, sugar or sugary foods melt onto the hob, they should be removed while hot using
a spatula, taking care to avoid getting burnt.
1.5. GENERAL PRECAUTIONS
- The appliance must be installed by a technically qualified person with knowledge of current installation
standards and regulations.
- This instruction manual should always accompany the product if it is transferred to another owner.
- Children should be supervised whenever using the hob to ensure that they do not touch the hot surfaces or
get too close to the appliance during use.
- Disconnect the appliance from the electricity supply and wait until it is completely cold before performing any
maintenance operations.
- The hob's power supply cable must not be replaced by the user. This operation must only be performed by
competent technical personnel.
- Should repairs be necessary, always contact an authorized technical assistance centre and demand original
parts.
- Repairs made by incompetent personnel may cause damage.
WARNING:
If the surface is broken, disconnect the appliance by turning off the power supply protection
device, to avoid the possibility of an electric shock.
The hob has been designed to not interfere with the operation of other pieces of electrical equipment, provided
that they respect the rules that apply to them.
The induction hob creates magnetic fields in its vicinity.
To ensure that no interferences are generated between the hob and pacemakers, the pacemaker must have
Summary of Contents for MI 1605
Page 59: ...GEBRAUCHSANLEITUNG 59 ...
Page 60: ...PGQ1939 4 ...
