ATTENTION:
Due to potential excessive heat development which
may cause an overheating damage during device oper-
ation it is necessary to leave space for ventilation of at
least 1U height at the top and the bottom of the IMS
system. If this is not possible, then the system must be
equipped with an active cooling module - ACM . See
chapter "Retrofit the System with an Active Cooling
Module - ACM".
The left Figure shows the expected air flow during device in operation without ACM (active cooling mod-
ule) and with space between devices for ventilation (1U at the bottom and the top). In the right figure the air
flow during device in operation with ACM and no space between devices in a server rack is depicted.
12.2 IMS M4000 Chassis
The M4000 chassis is supplied with a 19-inch mount-
ing bracket set.
A bracket set for ETSI rack mount can also be supplied
on request. During installation, make sure that the
mounting brackets are fastened at all marked points
with the screws included in the delivery.
36
Date: 2nd July 2020
IMS - LANTIME M4000
