4 GNSS Receiver
4.1.1.13 Synthesizer
The output frequency and phase of the integrated synthesizer can be set here.
Frequency:
Frequencies from 1/3 Hz up to 10 MHz can be set by entering four digits and a
frequency range. By entering the frequency 0 Hz, the synthesizer can be switched off.
Phase:
With phase you can enter the phase position of the set frequency in the range -180
◦
to +180
◦
with a resolution of 0.1. When the phase angle is increased, the delay of the output signal
gets bigger. If a frequency higher than 10 kHz has been set, the phase cannot be changed.
IMS-GNS181 Setup Guide
Date: 20th March 2020
21
