3 Configuration DCF600HS
Please note that the following configurations only can be set via the RS-232 interface!
Device configurations and status information can be done or can be retrieved using the following
Meinberg programs:
MBGMONITOR WX:
Monitor program for older Windows versions (< WIN 7)
MBGDEVMAN:
for Windows (
≥
WIN 7) and Linux operating systems, the Meinberg Device Monitor
is available - a comprehensive program that can be used to perform not only configuration
and monitoring but also firmware updates.
3.1 Configuration mit MBGMON
The program serves the configuration of PZFMON Meinberg Radio Clocks. The software can be run on the
operating systems Windows 7, Windows Vista, Win9x, Win2000, WinXP and WinNT.
A connection between the DCF600HS and the program can be produced by serial port. The configurations are
described below.
Connection
8
Date: 24th July 2018
DCF600HS
