Meilhaus RedLab 1008, User Manual

Page: 18 / 34

RedLab 1008 User's Guide Functional Details
18
Main connectors and pin outs
Connector type
Screw terminal
Wire gauge range
16 AWG to 26 AWG
4-channel differential mode pin out
Note that the pins are labeled for 8-channel
single-ended mode on the RedLab 1008.
CH0 IN HI 1
CH0 IN LO 2
GND 3
CH1 IN HI 4
CH1 IN LO 5
GND 6
CH2 IN HI 7
CH2 IN LO 8
GND 9
CH3 IN HI 10
CH3 IN LO 11
GND 12
PC +5 V 13
PC +5 V 14
CAL 15
16 DIO0
17 DIO1
18 GND
19 DIO2
20 DIO3
21 GND
22 D/A OUT0
23 D/A OUT1
24 GND
25 CTR
26 GND
27 GND
28 PC +5 V
29 PC +5 V
30 TST
8-channel single-ended mode pin out
Note that the pins are labeled for 8-channel
single-ended mode on the RedLab 1008.
CH0 IN 1
CH1 IN 2
GND 3
CH2 IN 4
CH3 IN 5
GND 6
CH4 IN 7
CH5 IN 8
GND 9
CH6 IN 10
CH7 IN 11
GND 12
PC +5 V 13
PC +5 V 14
CAL
15
16 DIO0
17 DIO1
18 GND
19 DIO2
20 DIO3
21 GND
22 D/A OUT0
23 D/A OUT1
24 GND
25 CTR
26 GND
27 GND
28 PC +5 V
29 PC +5 V
30 TST
Analog input terminals (CH0 In - CH7 In)
Connect up to eight analog input connections to the screw terminal connections labeled
CH0 In
through
CH7 In
.
Refer to the pinout diagrams on page 18 for the location of these pins.
You can configure the analog input channels as eight single-ended channels or four differential channels. When
configured for differential mode, each analog input has 12-bit resolution. When configured for single-ended
mode, each analog input has 11-bit resolution, due to restrictions imposed by the A/D converter.