3.2 General Notes
Important Note: The external connections to the board should only
be made or removed in a powered-down state.
Before handling and installing the board and cable, make sure that
you ground yourself. Electrostatic discharge can damage some of
the more sensitive components on the board.
Look for proper connection of the cable. It must join the Sub-D jack
completely and must be fixed with both screws. Otherwise a
proper operation of the board cannot be guaranteed!
All unused input channels should be grounded to avoid crosstalk
between the input lines.
For the pin configuration of the 78-pin female D-Sub see „78-pin D-
Sub (ST1) – ME-630 „Standard“ on page 29).
In the following chapters you find a description for wiring of each
functional group. For details of operation modes and programming,
please read chapter 4 on page 22 and following.
Summary of Contents for ME-630 Series
Page 13: ......
