Meiko UPster H 500 M2, Operating Instructions Manual, Page: 34 / 56

9760465 34 / 56
8.3.3 Start wash cycle
1. Clear the washware (removing any large food residues, napkins, tooth picks,
lemon peel etc.).
2. Put the washware into the rack.
3. Open door.
4. Insert the rack into the dishwasher.
5.
Ensure that the correct programme has been selected, see chapter “Select
wash programme
” on page 32.
6. Close door.
7. Press the wash key .
The control light above the wash key is lit. The machine washes automatically and
switches the programme off after completion.
The wash cycle time may differ from the set programme running time if the pro-
gramme running time is not sufficient to heat up the boiler and tank water to the
pre-set temperature. In this case, the cycle time is automatically extended. This
means that the dishwasher runs until the required temperatures are reached, but
max. 5 minutes.