Meiko M-iClean U Operating Instructions Manual Download Page 43

Page: 43 / 64

43 / 64

9763258

No.

Display text

Measures/remedial action

407 Change demineralisation cartridge

• Replace demineralisation cartridge

408 Change osmosis system pre-filter

• Replace pre-filter

410

Water supply reverse osmosis
module disturbed

• Open water inlet valve
• Check pre-filter/sieve and clean or replace, if applicable

421 Insufficient water in holding tank

• Open water inlet valve
• Where appropriate, call a service technician

422

Max. level not reached in holding
tank

423

Water feed into holding tank insuffi-
cient

426 Osmosis membrane blocked/dirty

•  Possible to continue working
•  Check pre-filter and replace if necessary
•  Call a service technician!

500 Energy optimisation active

• No action required

501

Energy optimisation active

Tank temperature not reached

• Possible to continue working
• Call a service technician!

502

Energy optimisation active

Wash time increase in tank insuffi-
cient

• Possible to continue working
• If this message reoccurs, call a service technician

503

Energy optimisation active
Temperature increase not reached

• If this message reoccurs, call a service technician

504

Energy optimisation active

Final rinse temperature not reached

• Call a service technician!

505

Energy optimisation active

Wash time increase on final rinse
insufficient

• If this message reoccurs, call a service technician

892

Communication with SMART WIRE
node addr. 13

• Possible to continue working
• Call a service technician!

963 Bluetooth access error

•  Confirm message
•  Possible to continue working
•  Call a service technician!

969 Low battery

•  Confirm message
•  Able to continue working at limited capacity
•  Call a service technician!

971 Operating panel re-initialising

• If this message reoccurs, call a service technician

If an error message is displayed that is not in this list, please contact the authorised
service technician.

8.7

Shutting down the dishwasher

1. Press on/off key.

Summary of Contents for M-iClean U

































































Search results

Summary of Contents for M-iClean U

Reviews:

Related manuals for M-iClean U

Brands by name

Popular brands

Meiko M-iClean U, Operating Instructions Manual

Search results

Summary of Contents for M-iClean U

Reviews:

Related manuals for M-iClean U

Brands by name

Popular brands