13
10
11
12
13
Smear Copaslip
2
onto the thread of the cylinder head (5).
Line up the hydraulic set (6) with the cylinder and use a
hammer to tap it carefully into the bore. Screw the cylin-
der head tight using the cylinder head spanner (4) and a
torque wrench. See table below for torque value.
Tools required
: Hammer, Copaslip
2
, cylinder head span-
ner*, 1/2” ratchet.
*Cylinder head spanners are only available from Meijer
Handling Solutions B.V. (Art. Nº RE0058049).
Caution:
Do not damage the piston or cylinder head seals
during assembly as this can result in leakage.
Follow steps 4 to 5 in chapter on ‘Instructions for
Replacement of Sleeve’.
Screw the hose connectors (3) tight.
Tools required
: Open-ended spanner 22.
Finally, follow step 5 of the chapter on ‘Assem-
bly’.
1
See www.loctite.com
2
See www.kroon-oil.com
Cylinder diameter (mm)
Torque (Nm)
25
30
